11
L-A2-102
Rev 8 - 1501081400
TO LIGHT THE BURNER SYSTEM USING THE SWITCH BOX
Use the switch in front of the switch box (marked I = IGNITE; O = OFF, Fig. 11-1).
1. Press switch to I (Ignite); see Fig. 11-2. This transmits a rapid series of sparks at the pilot head and will
ignite the gas.
2. Sparks cease when the pilot fl ame is lit and stable. After a short time, the pilot will then light the main burner.
CAUTION: IF THE BURNER DOES NOT IGNITE WITHIN 20 SECONDS, STOP, WAIT 5 MINUTES, THEN
REPEAT STEPS 1. AND 2. ABOVE.
If the pilot will not stay lit after several tries, turn the ignitor switch to O (OFF) and call the service technician or
gas supplier.
Switch box
in ON position
Fig. 11-2
Switch box
in OFF position
Fig. 11-3
Switch box
Fig. 11-1
TO SHUT DOWN THE GAS LOG SET USING THE SWITCH BOX
Simply press the O (OFF, Fig. 11-3) switch in front of the switch box. The gas fl ow will cease, and all fl ames
(main burner and pilot) will go out (see important note below).
FOR YOUR SAFETY, READ BEFORE LIGHTING
We recommend that before you install the burner system, you familiarize yourself with the control valve layout.
This will help you to be confi dent operating the log set when fully installed.
WARNING
If you do not follow these instructions exactly, a fi re or explosion may result, causing property
damage, personal injury, or loss of life.
The Real-Fyre
®
EPK-1(P) has a pilot that is lit using the ignitor switch. When lighting the pilot, follow these
instructions exactly.
BEFORE LIGHTING, smell all around the gas log set area for gas. Be sure to smell next to the fl oor, as some
gas is heavier than air and will settle on the fl oor. IF YOU SMELL GAS, FOLLOW THE INSTRUCTIONS ON
THE FRONT COVER OF THESE INSTRUCTIONS.
OPERATING THE BURNER USING THE REMOTE CONTROL
If your EPK-1 came equipped with a remote, or if one was added later, follow the instructions included in the
remote kit for lighting and shutting down the attached burner.
Important: Both the switch box switch and the remote control (if equipped) must be in the off state to
shut the burner off. If one control is commanded off while the other is still on, the burner
will remain on.
LIGHTING INSTRUCTIONS
(24 pages)
(28 pages)
(24 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals